7 MENU
The table below shows menu item and its function.
AC Monitor (All Groups) AC Monitor (Block)
(1) (1)
7.1 Menu
The setting items for the indoor unit and central controller are laid out in the menu. 1 Touch “Menu” at screen of “AC Monitor (All
Groups)” or “AC Monitor (Block)”.
a
Item
Function
Filter Sign Reset
This function is used for turning off the filter sign of the connected indoor units.
This function can be used only for the indoor unit with “Filter Sign”.
Schedule Setting
This function is used for scheduled timer operation which is possible to set by each block or group.
This function is used for setting the time (by the minute), “Run/Stop” and temperature (19 ～ 30
°C) .
Schedule Timer Setting
For weekly schedule setting, up to 10 schedule items can be set per day.
It is also available to copy the setting contents.
Holiday Setting
Thi s function is used for suspending the schedule operation temporarily.
The schedule operation will not be available when this function is set.
This function is used for setting irregular holidays such as national holidays.
Schedule Timer ON/OFF
Setting
“Schedule Timer OFF Setting” is used for suspending the schedule operation for the target group.
The schedule operation will not be available when Schedule Timer is OFF.
This function is used for a long holiday.
Date&Time This function is used for adjusting date and time .
Touchscreen Cleaning This function is used for cleaning LCD (liquid crystal display) of central controller.
Name Register
This function is used for registering name of the block and group.
It is also available to copy the name.
If the group/block is registered without name, it will be registered as “Group 1-1” or “Block 1” automatically.
Screen Display Setting This function is used for setting the screen display.
Brightness This function is used for adjusting the brightness and auto-off time of the touchscreen display.
Temperature Unit
This function is used for changing the temperature unit.
Accumulated Operation Time
This function is used for indicating the accumulated operation time of the air conditioner.
The accumulated operation time will be indicated by month.
The operation time is memorized for 24 months.
Contact Information This function is used for indicating the service contact address and the latest alarm code.
Language Setting This function is used for changing the displayed language.
HYJM-S01H
To Next Page
Loading...
Need help?
General
