04-3
4.4 Rims
Use only those rims indicated in the general op-
erating permission documents. If you would like
to use other rims, you must consider the follow-
ing points:
Rules for the use of other rims:
- Size,
- mechanisms,
- compression depth and
- theload/bearingcapacitymustbesufcient
for the permissible total mass.
- The chuck cone of the fastening screw must
correspond to the rim mechanisms.
Modicationscanonlybemadewith
the manufacturer's permission.
Theexactspecicationscanbe
found in the general operation per-
mission documents.
Rules for wheel screws:
- Wheelscrewsshouldrstbetightenedafter
50 km, then every 500 km.
Adjusting torque
- for steel rims: 110 Nm
- for aluminium rims: 120 Nm
WARNING: When changing rims
(steel -> aluminium / aluminium ->
steel) ensure that you are using the
correct wheel screws.