Honda CRF450R 2007 Service Manual

CLUTCH/STARTER CLUTCH/KICKSTARTER/GEARSHIFT LINKAGE
Apply molybdenum oil solution to the pinion gear
inner surface.
Install the pinion gear and thrust washer.
Set the sharp edge Install the snap ring in the groove of the spindl e.
of the snap rmg
faCIng OUI. Check
r
118/ lhe snap ring IS
ssated In the
groove.
Align the punch marks and install the starter ratchet.
INSTALLATION
Install the ratchet spring.
Apply transmission oil to the kickstarter spindle
journal.
Be sure the nnchet Install the kickstarter assembly to the crankcase and
spnng did no t fall rotate the spindle counterclockwise until the ratchet
oHlhespmdle tab is clear of the stopper plale .
dUflng ins/a/ia/lOft.
11-18
Hook the return spring end into the hole in the
crankcase.
I I
THI""" WASHER
SNAP RING

Honda CRF450R 2007 Specifications

General

Brand	Honda
Model	CRF450R 2007
Category	Motorcycle
Language	English