Honda CRF450R 2007 Service Manual

,
l
CRANKCASE/CRANKSHAFT /TRANSMISSION/BALANCER
Each shift fork h as an identification mark , "EVR" is
for the right shift for k, "EYL· is the left shift fork and
"Eye· is for the center shift fork.
Apply transmission oil to the sh ift drum gu ide
grooves.
Apply molybdenum oil solution to the following
parts:
- Shift fork claw s and guide pins
-
Shift fork sliding s urf aces
-
Sh ift fork shaft
Install the shi ft forks to the grooves in the sl i ding
gears .
• Face all shift fork marks to the left crankcase.
Install the shift drum by al i gning the guide pins on
the shift forks with the guide grooves in the shift
drum.
Slide the shift fork shafts through the shift forks, and
into the crankcase.
CRANKCASE ASSEMBLY
Temporarily install the left crankcase.
Place the left crankcase facing down and separate
the l
eft and right crankcase halves.
Install the oil pump inner/ outer rotor and shaft in
the
left crankcase.
Install the one-way valve, dowel pins and a new
gasket.
"EVA "
13-25

Honda CRF450R 2007 Specifications

General

Brand	Honda
Model	CRF450R 2007
Category	Motorcycle
Language	English