Honda CRF450X 2005 User Manual

,
813 car ef ul no! to
scratch the slider
end nor to da mage
the d ust S6al.
FRONT WHEEL/SUSPENSION/STEERING
DISASSEMBLY
Clean the fork assembly, the sliding surface of the
fork slider and the bottom of the slider afound the
center bolt before disassembling the fork.
Measure the length between the axle holder and
outer tube, and record it before disassembling the
fork.
Hold the oute r tube and remove the fork damper
using the special tool.
TOOL:
Lock nut wrench, 50 mm 07WMA·KZ30100
Slide the outer tube down onto the axle holder.
Drain the fork oil from the fork leg.
Drain the fork oil from the oil hole (After '07: oil
holes) in the fork damper.
T emporarily install the fork d amper assembly into
the oute r tube.
'05 - ' 07 show n:
FORK DAMPER
OUTER TUBE
' 05 - ' 07 shown:
OIL HOLE
FORK
DAMPER ASSEMBLY
OUTER TUBE --'
14-15

Honda CRF450X 2005 Specifications

General

Brand	Honda
Model	CRF450X 2005
Category	Motorcycle
Language	English