Honda CRF450X 2005 User Manual

FRONT WHEEL/SUSPENSION/STEERING
Insta ll the handleba r pad.
HPSD (Honda Progressive Steering
Damper): After '07
REMOVAL/INSTALLATION
Remove the front visor (page 3-5),
Remove the steering damper bolts, collars and
steering damper.
Clean and apply a locking agent to the steering
dam p er mo unt ing botts.
Install the steering Install the steering damper, collars and bolts.
damper onto the •
steering head pipe
with its 'UP'marlc •
facing up and f acing
toward the front.
The upper side collar is shorter than the l ower
side colla r.
Check that the stopper ri ng si de of the damper
rod is facing toward the front.
14-38
Tight en the steering damper bolts to the specified
to rque.
TORQUE: 20 N'm 12.0 kgf -m, 15 IbUt)
Raise the fron t wheel off the ground by placing a
workstand or equivalent under the engine.
Check
that the steering moves smoo t hly from side-
to-side.
Install the front visor (page 3- 5).
HAI"Dl.EB"R PAD
S TE ERING
DAMP ER
,
•
•

Honda CRF450X 2005 Specifications

General

Brand	Honda
Model	CRF450X 2005
Category	Motorcycle
Language	English