Honda CRF450X 2008 Service Manual

l
WHEEl BEARING
Turn the inner race of each bearing with your finger .
The bearings should turn smoothly and quietly .
Also check that the bearing oute r race fits tight ly in
the hub.
Replace the wheel Replace the bearings if the inner race does not t urn
bean"ngs in pairs. smoo th ly, quietly, or if oute r race fits loosely in the
h ub .
WHEEl RIM
REAR WHEEL/SUSPENSION
WHEEL BEARI NG
Check the rim (unout by placing the wheel in a , ----- ------------,
truing stand.
Spin the wheel by hand, and read the runcut using a
dial indicator.
Actual (unout is 1/2 the indicator reading.
SERVICE LIMITS:
Radial: 2.0 mm (0.08 in )
A xia l: 2.0 mm (0.08 in)
Check the spokes and tighten any that are l oose .
DISASSEMBLY
Remove the bolts , nuts and brake dis c.
Remove
the right dust seal.
Remove the driven sprocket bolts, nuts and was h- iii~~ ~;~i~~S~~~~~ ~~
er s.
Remove the driven sprocket.
Remove
the left dust seal.
15-9

Honda CRF450X 2008 Specifications

General

Brand	Honda
Model	CRF450X 2008
Category	Motorcycle
Language	English