Honda CRF450X 2008 Service Manual

\
FRAME/BODY PANELS/EXHAUST SYSTEM
Align the muffler Install the heat shield and washer, tighten the bolt
tabs lind hear shield to the specified torque.
grommets.
TORQUE: 12 N'm (1.2
kgf·m, 9 Ibf.ft l
Install a new gasket onto the exhaust pipe.
Install the muffl er to the exhaust pip e.
Install the washe r and muffler mounting bolts.
Tighten the muffler joint band bolt to the specified
torque.
TORQUE: 21 N'm (2.1 kgf ·m, 15 Ibf.ft)
Tighten the muffler mounting bolts to the specified
torque .
TORQUE: 26 N'm /2.7 kgf ·m, 19 Ibf - tt )
Install
the right side cover (page 3-3).
MUFFLER REMOVAL/INSTALLATION
(After '07)
Remove the right side c over (page 3-3).
Loosen the muffler joint band bolt .
HEAT
SHIELD
BOLTtvVASHER
3-11

Honda CRF450X 2008 Specifications

General

Brand	Honda
Model	CRF450X 2008
Category	Motorcycle
Language	English