Appendix
Instruction manual 854 ATG Page 49
Appendix A Article and part numbers
No. Description Part no.
2 drum with 27 m stainless steel wire + shaft and tolerance ring S0854962
drum with 37 m stainless steel wire + shaft and tolerance ring S0854963
drum with 150 m stainless steel wire S0854325
4 set screw + ring (6 pc. M6 x 16) S0854941
5 set screw + ring (3 pc. M10 x 25) S0854942
6 main shaft with magnet S0854340
7 key for main shaft S6576001
9 terminal compartment cover S0186020
12 terminal block assembly S0854375
13 8 wire cable bushing S0854950
10 wire cable bushing S0854947
17 GPS printed circuit board S0854615
set of fuses (10 pc. 1 A, 250 V and 10 pc. 250 mA 250 V) S0854970
18 back-plane assembly
(including transformer 110, 130, 230, 240 V) S0854951
back-plane assembly
(including transformer 65, 240 V) S0854964
19 HCU optional printed circuit board for:
VITO temperature and/or water probe S0854930
VITO temperature and/or water probe + HART device(s) S0854931
Analog level output S0854935
Analog level output + Spot temperature Pt100 RTD +
VITO temperature and/or water probe + HART device(s) S0854934
EPROM programmed for HCU / ICU_HPI S0181311
20 SPU printed circuit board without hardware alarms S0854611
SPU printed circuit board with hardware alarms S0854612
EPROM programmed for SPU2 alarms S0181172
EPROM programmed for SPU2 alarms + servo density S0181173
21 XPU-2 printed circuit board including display, EEPROM and NOVRAM:
standard S0854920
with i.s. output for TSI S0854921
with RS-232C + MODBUS communication channel S0854965
with RS-485 + MODBUS communication channel S0854968
display assembly XPU-2 S0873625
EPROM programmed for XPU-2 (all options) S0181176
XPU 1 printed circuit board including display assembly S0854959
display assembly XPU 1 S0854621
test magnet XPU-2 S0186236
To Next Page
Loading...
Need help?
General
