Honeywell BENDIX/KING RDR 2000 User Manual

BENDIX/KING RDR 2000
Rev 7, July/2002 00643I05.TDC Page 1-5
ART 2000 ANTENNA/RECEIVER/TRANSMITTERS (cont.)
STABILIZATION REQUIREMENTS:
Reference: 400 - 5000 Hz
Inputs: 26 Vrms, 400 Hz Sine Wave
115 Vrms, 400 Hz Sine Wave
20 Vp-p, 400 Hz Sine Wave
20 Vp-p, 400 Hz Square Wave
10.7 Vp-p, 400 Hz Square Wave
28 Vp-p, 5 kHz Square Wave
ARINC 429
Pitch and Roll Scaling: 30mV to 220mV/degree, 400 Hz or 5000 Hz
Pitch HI in phase with gyro exc. on pitch up.
Roll HI in phase with gyro exc. on right roll.
STABILIZATION RATE:
25
°
sec (pitch and roll)
SCAN ANGLE:
90
°
or 100
°
(configurable)
SCAN PHYSICAL RADIUS: 10 inch antenna (vert. polarized) - 5.31 inch
10 inch antenna (horiz. polarized) - 5.22 inch
12 inch antenna (vert. polarized) - 6.28 inch
12 inch antenna (horiz. polarized) - 6.20 inch
SCAN RATE:
25
°
/second
VERTICAL PROFILE:
± 30
°
TILT ANGLE:
± 15
°
PERFORMANCE INDEX:
10" Flat Plate Antenna: 209.9 dB ± 2.5 dB
12" Flat Plate Antenna: 212.7 dB ± 2.5 dB

Honeywell BENDIX/KING RDR 2000 Specifications

General

Brand	Honeywell
Model	BENDIX/KING RDR 2000
Category	Radar
Language	English