Honeywell ERX User Manual

54
www.honeywell.com

Item Item Name & Description
600 Calibration Trigger Enable
When enabled, a calibration of the recorder will cause an Audit Trail record to be placed
in memory and is indicated by the log trigger: Calibration
Code Value
0 Inactive
Default: 1 Active
601 Alarm Trigger Enable
When enabled, the occurrence of any alarm will cause an Audit Trail record to be placed
in memory and is indicated
by the log trigger: Alarm
Code Value
0 Inactive
Default: 1 Active
602 Serial Trigger Enable
When enabled, any successful sign-on through the serial port will cause an Audit Trail
record to be placed in memory and is indicated by the log trigger: Serial
Code Value
0 Inactive
Default: 1 Active
603 Mag Trigger Enable-MI Logo Button
When enabled, anytime the MI Logo button is used to initiate the display list mode, an
Audit Trail record is placed in memory and is indicated by the log trigger: Mag
Code Value
0 Inactive
Default: 1 Active
604 Change Trigger Enable
When enabled, anytime a user changes an item value, an Audit Trail record is placed in
memory and is indicated by the log trigger: Change
Code Value
0 Inactive
Default: 1 Active
P3 Pressure Coeffic
ients 1-26

605 P3 Pressure Coefficient 1 0.000000
606 P3 Pressure Coefficient 2 30.00000
607 P3 Pressure Coefficient 3 0.000000
608 P3 Pressure Coefficient 4 0.000000
609 P3 Pressure Coefficient 5 0.000000
610 P3 Pressure Coefficient 6 30.00000
611 P3 Pressure Coefficient 7 0.000000
612 P3 Pressure Coefficient 8 0.000000
613 P3 Pressure Coefficient 9 0.000000
614 P3
Pressure Coefficient 10 30.00000
615 P3 Pressure Coefficient 11 0.000000

Honeywell ERX Specifications

General

Brand	Honeywell
Model	ERX
Category	Recording Equipment
Language	English