Honeywell ERX User Manual

8
www.honeywell.com

538 637 637 638 637 638 638 645
539 638 638 632 638 632 632 646
540 632 632 640 632 640 640 636
541 639 640 633 639 633 633 647
542 640 670 642 640 642 642 648
543 651 633 634 635 634 634 657
544 650 641 644 645 644 644 656
545 649 642 426 646 635 426 655
546 255 634 428 636 646 428 255
547 255 644 429 647 636 429 255
548 255 673 431 648 648 431 255
Display List 2 Items 1-12 P3 with Voltage Monitor
537 255 255 255 255 255 255 255
538 255 255 255 255 255 255 255
539 255 255 255 255 255 255 255
540 255 255 255 255 255 255 255
541 255 255 255 255 255 255 255
542 255 255 255 255 255 255 255
543 255 255 255 255 255 255 255
544 255 255 255 255 255 255 255
545 255 255 255 255 255 255 255
546 255 255 255 255 255 255 255
547 255 255 255 255 255 255 255
548 255 255 255 255 255 255 255
Serial Access Mode
Serial access requires a serial cable, modem, or a Bluetooth device along with
MasterLink32, Palm Pilot, or Pocket PC software. In addition, the instrument must be
equipped with the same type of serial hardware that is accessing the instrument. While in
this the mode the instrument may be configured, calibrated, or data can be retrieved from
the instrument. Serial accesses co
nsist of two levels, level one and level two.
Level 1
Level 1 software access is considered a lower level access to the instrument and
software functions and is gained through the use of a laptop computer, Palm
Pilot, or Pocket PC and appropriate serial hardware connected to the instrument’s
serial port. The user must enter a five-digit code access code (default 11111) to
enter level one. Leve
l one is limited in its ability to change or configure the
instruments parameters and its functionality is control and configurable by Level
2 access.
Level 2
Level 2 software is the highest available level access and has access to all
instrument and software functions and is gained through the use of a laptop
computer, Palm Pilot, or Pocket PC and appropriate serial hardware connected to
the i
nstrument’s serial port. The user must enter a five-digit code access code
(default 22222) to enter level two.


Honeywell ERX Specifications

General

Brand	Honeywell
Model	ERX
Category	Recording Equipment
Language	English