18
Note: If groups are enabled, the group is shown after the zone address.
On the bottom row, the description of the zone is shown to aid identification.
Use
A
and
B
to scroll to other zones in the system.
Press
#
to show additional diagnostic information for that zone. This may be
required for fault finding when talking to the alarm installation company by phone.
Display Log (22 ent)
This option displays the system event log. The log records all events that occur in
the system and is used to track the chain of events during a break-in, or when
trying to trace a fault.
On entering the option, the most recent event is displayed on screen as shown
below:
Use
A
and
B
to scroll through the events.
Hold the scroll keys to scroll through the events one day at a time with the date
only displayed while scrolling.
Press
#
to display additional information, where available.
Note: If groups are enabled, you can select which groups to view before entering
the log.
1001A1 CLOSED
To Next Page
Loading...
Need help?
General
