24
09=Template
You must allocate an access template to every user on the system. An access
template is a list of groups and time schedules that govern card access through
doors and can be assigned to multiple users. The use of access templates reduces
programming time and complexity. For example, if there are multiple doors
leading into one group or area, then the user is given access to all of those doors in
one programming step. Templates are created in option 45.6, and are made up from
the weekly schedules created in option 65.1.
10=Radio Fob
Use this option to register a keyfob with the system (sub-option 1=Learn Fob).
Keyfobs can be assigned to a maximum of 98 users, and can be programmed to
set/unset or activate panic alarms, or both. These options may be limited by certain
regional restrictions.
Card Users (42
ent
2 ent)
Use this option to set the tags or cards on the system for various users. There are
seven sub-options:
1=Add Batch
Use this option to start enrolment and display the user/tag for each presentation.
When batch enrolling (auto assigning of tags to users), the panel increments the
user number, starting from Batch Start. It does this for every new tag presented at
the DCM assigned in Batch DCM.
2=Test Batch
Use this option to check the tag number stored at the panel for the current tag
presented at the Batch DCM. It can also be used to go directly to the user
programming details that are assigned to the presented tag.
3=Delete Batch
Use this option to remove card numbers from enrolment.
A warning is given
before deletion.
4=Batch Start
Use this option to set the first user number in the enrolment.
5=Batch End
Use this option to set the last user number in the enrolment.
To Next Page
Loading...
Need help?
General
