Honeywell Lynx Plus Series Installation And Setup Guide

Lynx Plus Series Installation and Setup Guide
- 5 -
System Features
The Lynx Plus Series control is a self-contained, rechargeable wireless control/communicator that features
easy installation and usage. A built-in speaker provides voice annunciation of system status along with voice
descriptors of each zone. An internal module (if provided) allows the Lynx Plus Series to communicate with
the Central Station via the Internet.
UL
ULUL
UL
Lynx Plus Series is not intended for UL985 Household Fire applications unless a 24-hour backup battery
(P/N LYNXRCHKIT-HC or LYNXRCHKIT-SHA) is installed.
Powerline Carrier Devices have not been evaluated by UL.
Features
System Features
• Real-time clock display and 2 line by 16
character alpha display
• Message center (for user recorded messages)
• Voice announcement of system and zone status
• Voice chime
• Alarm clock
• Reminder
• X10 scheduling
• Latch key reports
• Automatic stay arming
• Remote phone control
• Speaker phone operation
• “Follow me” reminder and system announcements
• 8 User Codes (Installer, Master, 5 Secondary,
Duress)
• 3 Panic Functions
Zones and Devices
• 1 Hardwire zone
• Up to 24 Wireless zones (5800 Series
transmitters)
• Up to 16 Wireless button zones
• Up to 8 Powerline carrier devices
• Supports wireless keypads
Communication
• Ademco Low Speed
• Sescoa/Radionics
• Ademco Express
• Ademco Contact ID
• Internet central station communication
• GSM cellular central station communication
• Two-way voice communication Supports
AlarmNet remote services
Alarm Output
• Built-in sounder
• Bell output (120mA max.)
• Steady output for burglary/panic
• Temporal pulse output for fire and carbon
monoxide alarms
• Long range radio/audio alarm verification
Programming
• Options stored in EEROM
• Can be downloaded or controlled via IBM-
compatible computer using Compass
downloader software and specified HAYES-
compatible modem or via capable GSM or IP
communications module
• Voice prompt programming mode
Other Features
• Exit error feature (detects difference between an
actual alarm and exit alarm caused by leaving a
door open after the exit delay expires)
• Event log stores up to 84 events
• Macro/ 1-button paging
• RF jam detection
• Compatible with encrypted (high-security)
devices
System Power
• Primary Power: K10145WH or K10145X10 plug-
in transformer, 110VAC to 9VAC, 25VA output
(K10145CN in Canada)
• Backup battery: Rechargeable nickel-metal
hydride battery pack rated at 7.7Vdc.

Honeywell Lynx Plus Series Specifications

General

Brand	Honeywell
Model	Lynx Plus Series
Category	Security System
Language	English