Honeywell PC42T User Manual

Chapter 2 — Connect the Printer
24 PC42t Desktop Printer User Guide
Connect the Printer to Your Network
If your printer has a factory-installed optional Ethernet port, you can
connect the printer to your network. By default, the printer is configured
to obtain an IP address through DHCP. If your network uses a different
method to assign IP addresses, you need to configure the IP address
assignment method by using your printer configuration software through
a USB or an optional serial connection.
1 Turn on the printer.
2 Connect one end of the Ethernet cable to the printer and the other
end to the network.
3 Print a configuration label to find the IP address for the printer. For
help, see “About Test Labels” on page 19.
It takes approximately 10 seconds after the printer LED turns steady
green to obtain an IP address. If the configuration label prints an IP
address of 0.0.0.0, wait 10 seconds and print another label.
4 Configure any necessary Ethernet settings through the printer web
page or PrintSet.
Connect a USB Device
You can use the USB host interface port on the printer to connect
keyboards, bar code scanners, or a USB storage device.
1 If you are connecting a USB storage device, make sure the device
has a single partition and is formatted as FAT16 or FAT32.
2 Connect the device to the USB host port.

Honeywell PC42T Specifications

General

Color	No
Print technology	Thermal transfer
Maximum resolution	203 x 203 DPI
Maximum print height	- mm
Maximum printing width	104.1 mm
Certification	UL, cUL, cULus, CE, FCC, D Mark CCC, KCC, RCM
Internal memory	64 MB
Built-in barcodes	1D, 2D, Code 49, Data Matrix, EAN13, EAN8, MaxiCode, QR Code
Display	LED
Product color	Black
Ethernet LAN	Yes
Optional connectivity	Ethernet, Parallel, Serial (RS-232)
USB 2.0 ports quantity	1
Connectivity technology	Wired
Ribbon width	109.2 mm
Core diameter	25.4 mm
Ribbon length	300 m
Maximum label width	110 mm
Maximum media length	9.6 mm
Maximum roll diameter	127 mm
Supported paper width	25.4 - 110 mm
Input current	1.5 A
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
AC adapter output current	2.5 A
AC adapter output voltage	24 V
Storage temperature (T-T)	-40 - 60 °C
Operating temperature (T-T)	5 - 40 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	10 - 80 %

Weight and Dimensions

Depth	297 mm
Width	226 mm
Height	177 mm
Weight	2500 g