Honeywell PX6ie User Manual

CHAPTER
3
PX4ie and PX6ie High Performance Printer User Guide 53
CONNECT THE PRINTER
This section contains information about connecting the printer to a PC or to a
network. Use the Printer Webpage or the Main Menu to configure the settings.
Connect the Printer to Your PC
You can connect the printer to your PC using one of the following methods.
Connect the Printer Using a Serial Cable
You can use a serial connection to communicate with your PC and send commands
directly to the printer through a terminal connection.
1. Connect one end of the DB9 to DB9 RS-232 cable to the back of your printer
and connect the other end to a serial COM port on your PC.
2. If necessary, change the PC serial port configuration to match your printer.
Connect the Printer Using a USB Cable
Connect only one printer to your PC, either directly or through a hub. You do not
need to set up any parameters for USB communications.
1. Download and install the InterDriver software on your PC (see Install Printer
Drivers).
2. When prompted, connect one end of the USB Type A cable to the back of the
printer and connect the other end to your PC.
Connect the Printer to Your Network
These network interfaces provide features such as security, FTP server, web page,
and Alert handling.

Honeywell PX6ie Specifications

General

Color	No
Print technology	Thermal transfer
Maximum resolution	300 x 300 DPI
Printable dot numbers	11.8 dot
Maximum printing width	167.4 mm
Display	LCD
Control type	Buttons, Touch
Product color	Gray
Display diagonal	2.3 \
Windows operating systems supported	Yes
RS-232 ports	1
Optional connectivity	Parallel, Wireless LAN
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technology	Wired
Core diameter	76 mm
Maximum label width	170 mm
Maximum roll diameter	80 mm
Flash memory	128 MB
Certification	CE (EN55022 Class B), FCC Class B, UL/cUL, C-Tick
Internal memory	256 MB
Image formats supported	PNG, BMP, GIF, PCX
AC input voltage	90 - 265 V
AC input frequency	45/65 Hz
Power consumption (standby)	5 W
Power consumption (printing)	125 W
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	5 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Supported network protocols	TCP/IP-suite (TCP, UDP, ICMP, IGMP, etc.), LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP. SNMP-MIB II supported (over UDP/IP), private enterprise MIB included. Supports IPv4 and IPv6, NTP

Weight and Dimensions

Depth	482 mm
Width	335 mm
Height	238 mm
Weight	14130 g