Honeywell PX6ie User Manual

54 PX4ie and PX6ie High Performance Printer User Guide
Connect the Printer to an Ethernet Network
Use the Ethernet port to set up your printer as a network printer. The printer is set
to automatically retrieve an IP number from the network (DHCP) when you turn the
printer. You can use the network connection with InterDriver. You can also use it to
send commands directly to the printer through a terminal connection (Telnet), or
through FTP.
1. Turn the printer off.
2. Connect the Ethernet cable to the Ethernet port in the rear of the printer and
connect the other end of the cable to your network.
3. Turn the printer on.
4. If your printer uses a DHCP server to assign IP addresses, the IP address
appears in the lower left corner of the screen.
• For an icon printer, use Honeywell PrintSet 5 to retrieve the printer IP
address.
5. If you are not using a DHCP server to automatically assign IP addresses to
devices in your network, you must set a static IP address and other network
information manually. Continue with the next step.
6. For a non-DHCP network:
• For a full touch printer, from the Main Menu select Settings >
Communications > Ethernet > IPv4 or IPv6 and change the settings as
needed.
• For an icon printer, configure the Ethernet settings through Honeywell
PrintSet 5.
Printer Drivers
Before you can use the printer with Microsoft® Windows® printing applications, you
must install printer driver software on the PC. Drivers enable the printer to commu-
nicate with your PC and with printer software applications
Setting Default
(IPv4) IP Assignment Method DHCP
(IPv4) IP Address 0.0.0.0
Subnet Mask 0.0.0.0
Default Router 0.0.0.0
DHCP Response Broadcast
(IPv6) IP Assignment Method Automatic
(IPv6) IP Address Automatic

Honeywell PX6ie Specifications

General

Color	No
Print technology	Thermal transfer
Maximum resolution	300 x 300 DPI
Printable dot numbers	11.8 dot
Maximum printing width	167.4 mm
Display	LCD
Control type	Buttons, Touch
Product color	Gray
Display diagonal	2.3 \
Windows operating systems supported	Yes
RS-232 ports	1
Optional connectivity	Parallel, Wireless LAN
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technology	Wired
Core diameter	76 mm
Maximum label width	170 mm
Maximum roll diameter	80 mm
Flash memory	128 MB
Certification	CE (EN55022 Class B), FCC Class B, UL/cUL, C-Tick
Internal memory	256 MB
Image formats supported	PNG, BMP, GIF, PCX
AC input voltage	90 - 265 V
AC input frequency	45/65 Hz
Power consumption (standby)	5 W
Power consumption (printing)	125 W
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	5 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Supported network protocols	TCP/IP-suite (TCP, UDP, ICMP, IGMP, etc.), LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP. SNMP-MIB II supported (over UDP/IP), private enterprise MIB included. Supports IPv4 and IPv6, NTP

Weight and Dimensions

Depth	482 mm
Width	335 mm
Height	238 mm
Weight	14130 g