Honeywell ScanPal EDA51 User Manual

P28
Inserting SD card
You can use a SD card to expand the memory or to install softwares. Honeywell recommend the using of Single
Level Cell (SLC) graded SD memory card or SDHC memory card in order to achieve optimum performance and
durability.
Note: format the memory card when you use it for the first time.
1. Turn off the terminal.
2. Press down the battery cover safety button to move the lock to the unlock position at right;
3. Open the battery cover with the battery cover buckle handle;
4. Pull out the battery (First open the battery connector side, then pull out the battery)
5. Open the Micro SD card’s silicone cover;
6. Open the Micro SD card cover and insert the card;
7. Insert the battery (first insert one end before pressing the other end in order for it to be connected to the
device);
8. Press to lock the battery cover
9. Press down the battery cover and slide the battery cover buckle handle to lock it.
10. Switch on the device
Micro SD Card

Honeywell ScanPal EDA51 Specifications

General

Brand	Honeywell
Model	ScanPal EDA51
Category	Handhelds
Language	English