EasyManuals Logo
Home>HP>Switch>5130 EI Switch Series

HP 5130 EI Switch Series User Manual

HP 5130 EI Switch Series
70 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #54 background imageLoading...
Page #54 background image
50
Power supply status LED
The H P 513 0 -24G-SFP-4SFP+ EI switch provides the PWR1 and PWR2 LEDs on the front panel to indicate
the operating status of the power supplies.
Table 20 Power supply status LED description
LED mark Status Description
PWR1/PWR2
Steady green
A power supply is installed in the power supply slot, and the power
supply is outputting power correctly.
Steady yellow
A power supply is installed in the power supply slot, but the power
supply is faulty or not powered on.
Steady red
A power supply is installed in the power supply slot, but the power
supply is faulty.
Off No power supply is installed in the power supply slot.
RPS status LED
The H P 513 0 -48G-2SFP+-2 X GT E I , H P 513 0 -24G-PoE+-2SFP+-2XGT (370W) EI, HP
513 0 -48G-PoE+-2SFP+-2XGT (370W) EI, H P 513 0 -24G-PoE+-4SFP+ (370W) EI, HP
513 0 -24G-PoE+-4SFP+ (370W) EI BR, H P 513 0 -48G-4SFP+ EI, H P 513 0 -48G-4SFP+ EI BR, HP
513 0 -48G-PoE+-4SFP+ (370W) EI BR, and H P 513 0 -48G-PoE+-4SFP+ (370W) EI switches support RPS
input and provide an RPS status LED on the front panel to indicate the RPS operating status.
Table 21 RPS status LED description
LED mark Status Description
RPS
Steady green Both the RPS DC input and the AC input are normal.
Steady yellow
The RPS DC input is normal, but the AC input is disconnected or
has failed.
Off The RPS DC input has failed, or no RPS is connected.
Port mode LED
The H P 513 0 -24G-PoE+-2SFP+-2XGT (370W) EI, HP 513 0 -48G-PoE+-2SFP+-2XGT (370W) EI, HP
513 0 -24G-PoE+-4SFP+ (370W) EI, H P 513 0 -24G-PoE+-4SFP+ (370W) EI BR, H P 513 0 -48G-PoE+-4SFP+
(370W) EI BR, and H P 513 0 -48G-PoE+-4SFP+ (370W) EI switches provide a port mode LED. The port
mode LED indicates the type of information that the network port LEDs are showing. You can use the port
LED mode switching button to change the type of displayed port information.
Table 22 Port mode LED description
LED mark Status Description
Mode
Steady green The network port LEDs are showing port rates.
Flashing green The network port LEDs are showing the PoE status of the ports.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP 5130 EI Switch Series and is the answer not in the manual?

HP 5130 EI Switch Series Specifications

General IconGeneral
BrandHP
Model5130 EI Switch Series
CategorySwitch
LanguageEnglish

Related product manuals