4.1 Notify Server Management of New Members
Restore power to the system. Server Management will find the new hardware,
but you need to specify their inclusion into the system.
Example 4–1 Power-Up Display
MBM> 00 01 02 03 04 05 06 07 08 09 Attaching interface lo0...done
<< ------------ lines deleted ------------- >>
ES47 Server Management Failsafe Loader V2.0-2 Starting up
<< ------------ lines deleted ------------- >>
ES47 Server Management V2.0-16 Starting up
<< ------------ lines deleted ------------- >>
.~GRP-W-(grp_Probe) MBM/PBM cab:00 drw:1 is not in the member list.
X
~GRP-W-(grp_Probe) Use Set Membership -add -ca 0 -dr 1 MBM
Y
interrupt: GROUP IS FORMING
Z
...~GRP-W-(grp_Probe) MBM/PBM cab:00 drw:1 is not in the member list.
~GRP-W-(grp_Probe) Use Set Membership -add -ca 0 -dr 1 MBM
..~GRP-W-(grp_Probe) MBM/PBM cab:00 drw:1 is not in the member list.
~GRP-W-(grp_Probe) Use Set Membership -add -ca 0 -dr 1 MBM
interrupt: GROUP IS STABLE
[
<< ------------ lines deleted ------------- >>
Configuring for 2 CPUs
\
<< ------------ lines deleted ------------- >>
Running test 43, Software Alerts ... on 1 EV7s
Running test 46, Other Local Interrupt Bits ... on 2 EV7s
<< ------------ lines deleted ------------- >>
MBM Init finished at: WED APR 16 09:41:27 2003
<< ------------ lines deleted ------------- >>
MBM> ~GRP-W-(grp_Probe) MBM/PBM cab:00 drw:1 is not in the member list.
~GRP-W-(grp_Probe) Use Set Membership -add -ca 0 -dr 1 MBM
]
~GRP-W-(grp_Probe) MBM/PBM cab:00 drw:1 is not in the member list.
~GRP-W-(grp_Probe) Use Set Membership -add -ca 0 -dr 1 MBM
]
~GRP-W-(grp_Probe) MBM/PBM cab:00 drw:1 is not in the member list.
~GRP-W-(grp_Probe) Use Set Membership -add -ca 0 -dr 1 MBM
]
~GRP-W-(grp_Probe) MBM/PBM cab:00 drw:1 is not in the member list.
~GRP-W-(grp_Probe) Use Set Membership -add -ca 0 -dr 1 MBM
]
MBM>
Set Membership -add -ca 0 -dr 1 MBM
^
4-2 HP AlphaServer ES47 Upgrade
To Next Page
Loading...
Need help?
General