EasyManuals Logo
Home>HP>Server>AlphaServer ES80

HP AlphaServer ES80 Upgrade Manual

HP AlphaServer ES80
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #71 background imageLoading...
Page #71 background image
5.2 Run Q-Vet
CAUTION: Misuse of Q-Vet may result in loss of customer data. Customers
are not authorized to access, download, or use Q-Vet. Compaq engineers use
Q-Vet during system development; they designed Q-Vet to verify system
installation during development.
Q-Vet is a Qualification Verifier Exerciser Tool used to exercise systems under
development. Run the latest released version of Q-Vet to verify that hardware is installed
correctly and is operational. Q-Vet does not verify operating system or layered product
configurations.
The latest Q-Vet release, information, Release Notes, and documentation are located at
http://chump2.mro.cpqcorp.net/qvet/ or from the Alpha Firware Update CD. If the system is
partitioned, Q-Vet must be installed and run separately on each partition. Since Compaq
Analyze is used to view Q-Vet errors, it is useful to install it prior to running Q-Vet.
CAUTION: Do not install the Digital System Verification Software (DECVET) on the
system; use Q-Vet instead.
Run only IVP scripts on systems that contain customer data or any other devices that must
not be overwritten. See the Q-Vet Disk Testing Policy Notice on the Q-Vet Web site for
details. All Q-Vet IVP scripts use Read Only and/or File I/O to test hard drives. Floppy and
tape drives are always write-tested and should have scratch media installed.
Non-IVP Q-Vet scripts verify disk operation for some drives with write-enabled techniques.
These are intended for engineering and manufacturing test only. Q-Vet must be de-installed
upon completion of system verification.
5.2.1 Swap or Pagefile Space
The system must have adequate swap space (on Tru64 UNIX) or pagefile space (on
OpenVMS) for proper Q-Vet operation. You can set this up either before or after Q-Vet
installation.
If during initialization Q-Vet determines that the system does not have enough
swap/pagefile space, it will display a message indicating the minimum amount needed. If
you wish to address the swap/pagefile size before running Q-Vet, see the swap/pagefile
estimates on the Q-Vet web site.
Verify with Q-Vet 5-3

Table of Contents

Other manuals for HP AlphaServer ES80

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP AlphaServer ES80 and is the answer not in the manual?

HP AlphaServer ES80 Specifications

General IconGeneral
BrandHP
ModelAlphaServer ES80
CategoryServer
LanguageEnglish

Related product manuals