4.5 Connect to Partition
Next, connect all components to your partition(s).
Example 4–5 Run Connect
MBM>
MBM>
conn(ect)
X
Connecting to partition. Use the sequence ^[^[MBM to return.
starting console on CPU 0
Y
<< ------------ lines deleted ------------- >>
Get Partition DB
hpcount = 1, spcount = 2, ev7_count = 4,
Z
io7_count = 2
hard_partition = 0
<< ------------ lines deleted ------------- >>
probe I/O subsystem
< ------------ lines deleted ------------- >>
starting drivers
initializing keyboard
Starting secondary CPU 1 at address 400030000
[
Starting secondary CPU 2 at address 800030000
Starting secondary CPU 3 at address c00030000
initializing GCT/FRU..... at 54c000
Initializing dqa dqb pka pkb pkc pkd pke pkf ega egb egc
AlphaServer Console V6.4-12, built on Mar 6 2003 at 14:32:06
P00>>>
\
1. Enter the command conn or connect X
2.
Connects to partition using your primary CPU. Y
3. Check your CPU count here. Z
4.
Secondary CPUs are started up. Check that all report in. [
5.
Prompt appears. Connection complete. \
4-10 HP AlphaServer ES47 Upgrade
To Next Page
Loading...
Need help?
General