HP Apollo a6000 Chassis User Manual

Removal and replacement procedures 31
This symbol on an RJ-45 receptacle indicates a network interface connection.
WARNING: To reduce the risk of electric shock, fire, or damage to the equipment, do
not plug telephone or telecommunications connectors into this receptacle.
This symbol indicates the presence of a hot surface or hot component. If this surface
is contacted, the potential for injury exists.
WARNING: To reduce the risk of injury from a hot component, allow the surface to
cool before touching.
#*!<unassigned_
variable>!*#
#*!<unassigned_
variable>!*#
This symbol indicates that the component exceeds the recommended weight for one
individual to handle safely.
WARNING: To reduce the risk of personal injury or damage to the equipment,
observe local occupational health and safety requirements and guidelines for manual
material handling.
These symbols, on power supplies or systems, indicate that the equipment is
supplied by multiple sources of power.
WARNING: To reduce the risk of injury from electric shock, remove all power cords
to completely disconnect power from the system.
Warnings and cautions
Before installing a chassis, be sure that you understand the following warnings and cautions.
WARNING: To reduce the risk of electric shock or damage to the equipment:
• Do not disable the power cord grounding plug. The grounding plug is an important safety
feature.
• Connect the power cord into a grounded (earthed) electrical outlet that is easily accessible
at all times.
• Disconnect the power cord from the power supply to disconnect power to the equipment.
• Do not route the power cord where it can be walked on or pinched by items placed against
it. Pay particular attention to the plug, electrical outlet, and the point where the cord extends
from the chassis.
CAUTION: Do not operate the chassis for long periods with the access panel open or
removed. Operating the chassis in this manner results in improper airflow and improper cooling
that can lead to thermal damage.
Chassis procedures
This section provides removal and replacement procedures for chassis components.
System fans
CAUTION: To avoid chassis shutdown, a fan must be replaced within 60 seconds of being
removed.
When removing or replacing a fan, observe the following guidelines:
• Five fans ship standard with the chassis. To boot and operate the chassis, all five fans must be
installed and operating.

HP Apollo a6000 Chassis Specifications

General

Brand	HP
Model	Apollo a6000 Chassis
Category	Server
Language	English