Component identification 44
Management module components
IMPORTANT: Do not connect both iLO ports to the network at the same time. Only one iLO
port can be connected to the network, while the other iLO port can be used only as a
connection to a second enclosure. Having both ports connected at the same time results in a
loopback condition.
IMPORTANT: If you have an APM connected to an Apollo a6000 Chassis, do not connect the
iLO port of the APM and the iLO port of the enclosure to the network at the same time. Having
both ports connected at the same time results in a loopback condition.