Diagnostic tools 41
HPE Smart Storage Administrator
The HPE SSA is a configuration and management tool for HPE Smart Array controllers. Starting with HPE
ProLiant Gen8 servers, HPE SSA replaces ACU with an enhanced GUI and additional configuration
features.
The HPE SSA exists in three interface formats: the HPE SSA GUI, the HPE SSA CLI, and HPE SSA
Scripting. Although all formats provide support for configuration tasks, some of the advanced tasks are
available in only one format.
Some HPE SSA features include the following:
• Supports online array capacity expansion, logical drive extension, assignment of online spares, and
RAID or stripe size migration
• Provides diagnostic and SmartSSD Wear Gauge functionality on the Diagnostics tab
• For supported controllers, provides access to additional features.
For more information about HPE SSA, see the Hewlett Packard Enterprise website
(http://www.hpe.com/support/ssa).
ProLiant Power Interface Control Utility
HPE ProLiant Power Interface Control Utility is a command-line utility performing power display and
control power functions for the chassis. You can use the utility and the embedded Power Management
Controller to set different power levels or chassis power capping.
The utility provides the following:
• Chassis fan controls
• Chassis power control
• Server fans and power through BMC, iLO, and BIOS
• Capability to power up servers based on power capacity
• Power emergency break support
• Capability to set the chassis power level through PPIC utilities with BMC and iLO
For more information or to download the ProLiant Power Interface Control Utility, see the Hewlett Packard
Enterprise website (http://www.hpe.com/support/ppicu_dr).
HPE Advanced Power Manager
HPE APM is a point of contact for system administration.
To install, configure, and access APM, see the HPE Advanced Power Manager User Guide on the
Hewlett Packard Enterprise website (http://www.hpe.com/support/hpesc).
To Next Page
Loading...
Need help?
General