70 Chapter1
Remove/Replace System Components
Converting Your System for Desktop or Rack-Mount Use
Converting Your Rack-Mount System to a Desktop System
To convert your rack-mount system to a desktop system, you will need to order the desktop
kit (HP Part Number A7227A) from you local HP Sales Representative. Next, follow this
procedure:
1. Unplug the workstation and reverse the procedure in the section “Converting Your
Desktop System to a Rack-Mount System” in this chapter. You will need to complete
steps 4 through 1 (respectively). Note that step 4 requires the use of the rack-mount
instructions that came with your desktop kit.
2. Complete step 5 in the section “Converting Your Desktop System to a Rack-Mount
System” in this chapter, but at the Configuration Menu prompt in step C, type:
Configuration Menu: Enter command > FanChoice DeskSide
To Next Page
Loading...
Need help?
General