To Next Page

To Previous Page

Revision History

The revision history for each edition of the manual is listed below:

Edition Revision History

E0601 First Printing

Problems, Questions, and Suggestions

If you have any problems or questions with our hardware, software, or documentation,

please contact either your HP Response Center or your local HP representative. If you

have access to a web browser, you can get the latest software and hardware patches at the

following URL:

http://www.hp.com/workstations/support/

Electrostatic Discharge (ESD) Precautions

Electrostatic charges can damage the integrated circuits on printed circuit boards. To

prevent such damage from occurring, observe the following precautions during board

unpacking and installation:

• Work on a static-free mat.

• Wear a static strap to ensure that any accumulated electrostatic charge is discharged

from your body to ground.

• Create a common ground for the equipment you are working on by connecting the

static-free mat, static strap, and peripheral units to that piece of equipment.

• Keep uninstalled printed circuit boards in their protective antistatic bags.

• Handle printed circuit boards by their edges, once you have removed them from their

protective antistatic bags.

HP b2600 Supplementary Guide

Other manuals for HP b2600