Device is a Hard disk
Enclosure # : 1
Slot # : 2
Target ID : 2
State : Ready (RDY)
Size (in MB)/(in sectors) : 57231/117210240
Manufacturer : ATA
Model Number : FUJITSU MHT2060B
Firmware Revision : 034E
Serial No : NR0LT5625AAG
Drive Type : SATA
------------------------------------------------------------------------
Enclosure information
------------------------------------------------------------------------
Enclosure# : 1
Logical ID : 50060b00:00c13846
Numslots : 8
StartSlot : 1
Start TargetID : 0
Start Bus : 0
------------------------------------------------------------------------
CLMChecking
Synopsis
CLMChecking -p <PARTITION> | -v | -h
Description
Perform memory optimization in cellular systems.
On cellular systems the available system memory can be accessed using two different approaches:
Interleaved memory
Meaning that the average memory latency is constant for all processes in the system.
Non-interleaved memory
Meaning that lower memory latency is provided for processes running in the same cell as
the memory.
For each cell, it is possible to determine the amount of memory that should not be interleaved.
The non-interleaved memory is known as cell local memory (CLM) or global non-interleaved
(GNI) memory. The amount of cell local memory can affect directly the system overall
performance. If running Windows, better performance can be obtained with maximum CLM.
Table 6-2 CLMChecking Options
DescriptionOptions
Print the CLM values of the cells in the partition.
-p <PARTITION>
Print the CLMChecking version.
-v | --version
Print help.
-h | --help
Examples
SSTK-v.3.2# ./CLMChecking
Partition #0:
CLM Cell 0 = 7
CLM Cell 2 = 7
Partition #1:
CLM Cell 1 = 7
CLM Cell 3 = 7
CLMChecking 49
To Next Page
Loading...
Need help?
General