49
Cables and Connectors in Your PC
Cables and Connectors in Your PC
Internal drives such as hard drives, DVD and CD-ROM drives use the following data
and power cables. These are connected to the system board and internal devices as
shown below. You must also connect the power connector, status panel connector and
CD audio connector (if a CD-ROM is fitted) to the system board.
Power connector
CD-ROM, DVD,
Tape or Zip drive
Hard drive
Floppy drive
CD audio connector
Status panel connector
Brio BA400
Models
Serial COM 2
connector:
used with an additional
serial port card
WOL (Wake on LAN)
connector:
with certain LAN (network)
cards, allows the PC to be
started from a network
Brio BA600
Models
CD audio connector
Status panel connector
Power connector
CD-ROM, DVD,
Tape or Zip drive
Hard drive
Floppy drive
WOL (Wake on LAN)
connector:
with certain LAN (network)
cards, allows the PC to be
started from a network
To Next Page
Loading...
Need help?
General