60
Installing an Expansion Card
Installing an Expansion Card
1
Remove the PC’s cover. Refer to page 44.
2
Locate the slot you want to use.
• If fitting a card in an empty slot, unscrew the slot cover facing the slot you want
to use and lift it out.
• If replacing a card in an expansion slot, undo the screw holding the card in place
and lift it out.
3
Aligning the new card carefully, press it firmly into the socket and tighten the
retaining screw.
4
Replace the PC’s cover. Refer to page 45.
To Next Page
Loading...
Need help?
General