To Next Page

To Previous Page

MultiBoot

Software Guide 5–5

Setting a New Default Boot Sequence

Use Computer Setup to set a startup sequence that the notebook

uses each time it is started or restarted.

1. To open Computer Setup, turn on or restart the notebook.

Press

F10 while the F10 = ROM Based Setup message is

displayed in the lower left of the screen.

❏ To change the language, press F2.

❏

For navigation instructions, press F1.

2. Use the arrow keys to select Advanced > Boot Options, then

press

enter.

3. Toggle the MultiBoot field to Enable.

4. Toggle the Boot Order fields to the boot sequence that you

prefer.

5. To save your preferences and exit Computer Setup, use the

arrow keys to select File > Save Changes and Exit, then

follow the instructions on the screen.

Your preferences are set as you exit Computer Setup and are

in effect when the notebook restarts.

Setting a MultiBoot Express Prompt

Use Computer Setup to set the notebook to display the MultiBoot

menu each time the notebook is started or restarted.