7–10 Software Guide
Setup, Diagnostic and Support Utilities
Installing Compaq Diagnostics
To install the Compaq Diagnostics utility, select Start > All
Programs > Software Setup > Compaq Diagnostics for Windows
> Next button, then follow the instructions on the screen.
Using the Compaq Configuration Record Scan
The Compaq Configuration Record scan compares the tablet PC
configuration at the time the Compaq Diagnostics utility was
installed to interim or current configurations.
1. To run the Compaq Configuration Record scan and open
the Compaq Configuration Record window, select Start >
Control Panel > Performance and Maintenance icon, then
select Compaq Configuration Record.
When the scan displayed on the progress bar is complete,
a window displays your configuration at the time Compaq
Diagnostics was installed and your current configuration.
2. To save the displayed information or view additional
information, such as interim configurations, select the Help
button on the menu bar, then follow the instructions on the
screen. The icon on the Help button is a question mark.
3. To exit the Compaq Configuration Record scan, select
File > Exit.
Using the Diagnostics Scan
When you run the Compaq Diagnostics scan, a scan of all system
components is displayed on the screen before the Compaq
Diagnostics window opens.
You can display more or less information from anywhere within
Compaq Diagnostics by selecting Level on the menu bar.
280125-001.book!!Page!10!!Sunday,!August!25,!2002!!3:51!PM
To Next Page
Loading...
Need help?
General
