HP HP-18C User Manual

9. If you want the alarm to repeat at a particular interval, press
IIDII to display the RPT menu. Key in an integer and press the
appropriate key. For example, 2 ~ causes the alarm to go off
at the same time every other day; 90 alii sets the repeat inter-
val to
11f2 hours. ImIlII restores the alarm to non-repeating. You
can specify repeat intervals up to 104 weeks in length (728 days,
17,472 hours, etc.)
10. Press' EXIT' to return to the APPT menu. The alarm you just set
will be listed as a pending alarm.
Editing Alarm Settings
When the HP-18C is displaying the alarm-setting menu. you can edit
any of the settings. To erase the message, press IIIiJI ., CLEAR 1
'INPUT I. To change the alarm from a repeating alarm to a non-repeat-
ing alarm, press IIDII 1mIlII·
Acknowledging an Alarm
When an alarm "comes due," the HP-18C beeps and the alarm an-
nunciator comes on.* If the alarm has a message, it is displayed on
line 1; otherwise, the HP-18C displays the date and time of the
alarm.
To acknowledge the alarm and clear the message, press any key while
the HP-18C is beeping. Alarms not acknowledged within 20 seconds
become past due.
If the calculator is turned off when an alarm comes due, it turns itself
on to announce the alarm. If you do not acknowledge the alarm
within 20 seconds, the alarm becomes past due .
• If the HP-18C is in the middle of a complex calculation when an alarm comes due, the
alarm annunciator comes on and the calculator beeps once. When the calculation is done,
the HP-18C displays the message and resumes beeping for 20 seconds.
8: Time, Alarms, and Date Arithmetic 121

HP HP-18C Specifications

General

Brand	HP
Model	HP-18C
Category	PDA
Language	English