397
2. Configure the
source address of
echo packets.
bfd echo-source-ipv6
ipv6-address
By default, the source address
of echo packets is not
configured.
The source address of echo
packets must be a global
unicast address.
For more information about
this command, see High
Availability Command
Reference.
3. Configure BFD echo
mode for an IPv6
static route.
ipv6 route-static
[
vpn-instance
s-vpn-instance-name ] ipv6-address
prefix-length interface-type interface-number
next-hop-address
bfd echo-packet
[
bfd-source
ipv6-address ]
[
preference
preference ] [
tag
tag-value ] [
description
text ]
By default, BFD echo mode for
an IPv6 static route is not
configured.
The next hop IPv6 address
must be a global unicast
address.
Displaying and maintaining IPv6 static routes
Execute display commands in any view.
Display IPv6 static route information.
display ipv6 routing-table
protocol
static
[
inactive
|
verbose
]
Display IPv6 static route next hop
information.
display ipv6 route-static nib
[ nib-id ] [
verbose
]
Display IPv6 static routing table information.
display ipv6 route-static routing-table
[
vpn-instance
vpn-instance-name ] [ ipv6-address prefix-length ]
IPv6 static routing configuration examples
Basic IPv6 static route configuration example
Network requirements
As shown in Figure 91, configure IPv6 static routes so that hosts can reach one another.
To Next Page
Loading...
Need help?
General