DescriptionItemCallout
For all server models except the HPE
SimpliVity 380 Gen10 G and the HPE
SimpliVity 380 Gen10 H, the Accelerator
card is installed in this slot. Both indicator
LEDs on the card emit solid green contin-
uously to indicate normal operation.
Note: The HPE SimpliVity 380
Gen10 G and HPE SimpliVity
380 Gen10 H server models
use software-enabled dedupli-
cation and compression and do
not support an Accelerator
card. For Gen10 G and Gen10
H (LFF only), PCIe slots 1 and
2 are available. For Gen10 H
SFF, slot 1 is used for the
E208i-p Boot Drive Controller
and is not available.
PCIe Slots 1 and 21
For all platforms except Gen10 H SFF,
this slot contains the Boot Drive Con-
troller (E208i-p). For Gen10 H SFF this
slot is utilized by the SAS Expander.
PCIe Slot 32
10 GbE FlexLOM (SFP+ model shown).10 GbE FlexLOM3
Dual USB 3.0 connectors enable you to
connect a USB device, such as a mouse
or keyboard.
USB connectors4
Dedicated iLO5 management port.iLO port5
Optional Secondary PCIe riser (requires
second CPU).
PCIe Slot 4-66
Embedded 4-port 1 GbE LOM. Note that
this feature may not be available based
on system configuration.
4 port 1 GbE LOM7
Use to connect a VGA monitor for local
access.
Video port8
Optional serial port connector.Serial port9
Dual Power Supplies for HA power (800
W auto-sense or 1600 W 220V).
Dual power supplies10
Redundant (RAID1) 300 GB Boot drives.Boot drives11
Specifications
There are optimium environment and technical specifications for the HPE SimpliVity 380. The specifications help you when
planning the appropriate installation location, environmental conditions, and resources such as power and cooling. See the
product QuickSpecs for the latest information on system specifications.
Component identification 11
Documentation Feedback: doc-feedback-hpe-storage@hpe.com
To Next Page
Loading...
Need help?
General