8–14 Hardware and Software Guide
Software Updates and Recoveries and System Software
Closing the Setup Utility
You can close the Setup utility with or without saving changes.
■ To close the Setup utility and save your changes from the
current session, use either of the following procedures:
❏ Press f10, and then follow the instructions on the screen.
–or–
❏ If the Setup utility menus are not visible, press esc to
return to the menu display. Then use arrow keys to
select
the Exit menu > Exit Saving Changes, and then
press
enter.
When you use the f10 procedure, you are offered an option
to
return to the Setup utility. When you use the Exit Saving
Changes procedure, the Setup utility closes when you press
enter.
■ To close the Setup utility without saving your changes from
the current session:
If the Setup utility menus are not visible, press esc to return
to
the menu display. Then use arrow keys to select the
Exit
menu > Exit Discarding Changes, and then press enter.
After the Setup utility closes, the notebook restarts in Windows.
To Next Page
Loading...
Need help?
General