HP ProCurve 6200yl Series User Manual

9-5
Configuring Secure Socket Layer (SSL)
General Operating Rules and Notes
3. Enable SSL on the switch. (page 9-15)
4. Use your SSL enabled browser to access the switch using the switch’s
IP address or DNS name (if allowed by your browser). Refer to the
documentation provided with the browser application.
General Operating Rules and Notes
■ Once you generate a certificate on the switch you should avoid re-
generating the certificate without a compelling reason. Otherwise,
you will have to re-introduce the switch’s certificate on all manage-
ment stations (clients) you previously set up for SSL access to the
switch. In some situations this can temporarily allow security
breaches.
■ The switch's own public/private certificate key pair and certificate
are stored in the switch's flash memory and are not affected by
reboots or the erase startup-config command
■ The public/private certificate key pair is not be confused with the SSH
public/private key pair. The certificate key pair and the SSH key pair
are independent of each other, which means a switch can have two
keys pairs stored in flash

HP ProCurve 6200yl Series Specifications

General

Brand	HP
Model	ProCurve 6200yl Series
Category	Switch
Language	English