1. Log in to the HP ProLiant Storage Server with the default user name
administrator and the password hpinvent.
The HP ProLiant Data Protection Storage Server Management console
and Rapid Startup Wizard will start automatically.
NOTE:
You can change the administrator name and password
when you confi gure the server using the "Rapid Startup
Wiz ard" on page 40.
2. To complete network configuration using the Rapid Startup Wiz ard,
see "Configuring the server on the network"onpage37.
Using the Remote browser method
The storage server ships with DHCP enabled on the network port. If the
server is placed on a DHCP-enabled network and the serial number of
the device is known, the server can be accessed through a client running
Internet Explorer 5.5 (or later) on that network, using the TCP/IP 3202 port.
IMPORTANT:
Before you begin this procedure, ensure that you have the following:
• Windows-based PC loaded with Internet Explorer 5.5 (or later) on
the same local network as the storage server
• DHCP-enabled network
• Serial number or IP address of the storage server
To connect the server to a network using the remote browser method, you
must first ensure that the client is configuredtodownloadsignedActiveX
controls.
To enable ActiveX controls
1. On the remote client machine, open the Internet Explorer web browser
and select Tools>InternetOptions>Security.
30
Accessing the HP Storage Server Management console
To Next Page
Loading...
Need help?
General
