7. On the Internet Options dialog box, click OK to finish.
To connect th e storage server to a network using the remote browser
method
1. On the remote client machine open Internet Explorer and
enter https:// and the serial number of the storage server
followedbyahyphen(-),andthen:3202. For example,
https://D4059ABC3433-:3202 Press Enter.
NOTE:
If you are able to determine the IP address fro m your DHCP
server, you can substitute the IP address for the serial
number and hyphen (-). For example: 192.100.0.1:3202.
2. Click OK on the Security Alert prompt.
3. Log in to the HP ProLiant Storage Server M anagem ent console with the
default user name administrator and the password hpinvent.
NOTE:
You can change the administrator name and password
when you confi gure the server using the "Rapid Startup
Wiz ard" on page 40.
4. To complete network configuration using the Rapid Startup Wiz ard,
see "Configuring the server on the network"onpage37.
IMPORTANT:
If you ar e using the remote browser method to access the HP Storage
Server Management console and Rapid Startup Wizard, always close
the r emote session before closing your Internet browser. Closing the
Internet browser does not close the remote session. Failure to close your
remote session impacts the limited number of remote sessions allowed on
the storage server at any given time.
Using the Remote desktop method
To connect th e storage server to a n etwork using t he remote desktop
method
1. On the PC client, select Start > Run.AtOpen,typemstsc,thenclick
OK.
32
Accessing the HP Storage Server Management console
To Next Page
Loading...
Need help?
General
