1-3
Getting Started
Getting Started With the Web Interface
Getting Started With the Web Interface
This section describes the following Web pages:
■ “Logging On” on page 1-3
■ “Interface Layout and Features” on page 1-3
Logging On
Follow these steps to log on through Web interface:
1. Open a Web browser and enter the IP address of the switch in the Web browser address field. The
default IP address is 192.168.2.10. This address is used if DHCP is unable to configure the server
address. For more information, see “Get Connected” on page 3-1.
2. On the Login page, enter the password (if one has been set), and then click Login.
By default, there is no password. After the initial log on, the administrator may configure a
password.
Note To set passwords, see “Password Manager” on page 10-8.
Figure 1-1. Login Page
Interface Layout and Features
Figure 1-2 shows the initial view.
To Next Page
Loading...
Need help?
General
