2-17
Status
Clock
Clock
The Clock status page displays the current time, time zone, and Daylight Savings Time settings.
To display the Clock page, click Status > Clock in the navigation bar.
Figure 2-11. Clock Status Page
Table 2-11. Clock Status Fields
For instructions on configuring the system time, see “Simple Network Time Protocol” on page 3-4,
“Time Zone” on page 3-6, and “Daylight Saving Time” on page 3-7.
Field Description
Current Time
Time The current time. This value is determined by an SNTP server. When SNTP is disabled, the
system time increments from 00:00:00, 1 Jan 1970, which is set at bootup.
Date The current date.
Time Source Source from which the time and date is obtained.
Time Zone
Time Zone The currently set time zone.
Acronym The acronym configured on the system for the time zone (e.g., PST, EDT).
Daylight Savings Time
Daylight Savings Time Shows whether Daylight Savings Time is enabled and the mode of operation:
•
Enabled—Clock adjustment made for Daylight Savings time.
•
Disabled—No clock adjustment will be made for Daylight Savings time.
•
Recurring—The settings will be in effect for the upcoming period and subsequent
years.
•
Non-Recurring—The settings will be in effect for only one period (i.e., they will not
carry forward to subsequent years).
To Next Page
Loading...
Need help?
General
