To Next Page

To Previous Page

102 External Storage XP for the XP12000/XP10000

NOTE: When using the Thunder 9500V subsystem as an external disk array, the following versions are

recommended. If you use a 9500V subsystem whose version is earlier than the following versions, the

SATA drive’s information might not be displayed correctly.

• For Thunder 9530V, Thunder 9520V, Thunder 9570V: version 0658 or later

• For Thunder 9580V, Thunder 9585V: version 1658 or later

Relationship between serial numbers in the Device list on the LU Operation pane and Thunder

9500V subsystem models

When the external disk array is a Thunder 9500V subsystem, you can identify the subsystem model from

the serial number displayed in the Serial column in the Device list on the LU Operation pane.

Inquiry Setting Command Queuing Mode Set this parameter to ON.

Vendor ID Keep this parameter as HITACHI (default),

and do not change.

Product ID Keep this parameter as DF600F (default),

and do not change.

ROM Microprogram Version You can either specify this parameter or