To Next Page

To Previous Page

Setting Up the Monitor

3–10 User’s Guide

Connecting the Power Cable

1. Read the warning below.

WARNING: To reduce the risk of electric shock or damage to your equipment:

■ Do not disable the power cord grounding plug. The grounding plug is an important safety feature. Plug the

power cord into a grounded (earthed) electrical outlet.

■ Be sure that the grounded power outlet you plug the power cord is easily accessible to the operator and

located as close to the equipment as possible. A power cord should be routed so that it is not likely to be

walked on or pinched by items that are placed upon it or against it.

■ Do not place anything on power cords or cables. Arrange them so that no one may accidentally step on or

trip over them. Do not pull on a cord or cable.

See “Power Cord Set Requirements” in Appendix B for additional information.

Connecting the power cable

2. Connect one end of the power cable to the monitor and the other end to a grounded electrical outlet.

Questions and Answers:

Need help?

Do you have a question about the HP w2207 and is the answer not in the manual?

HP w2207 Specifications

General

Plug and Play	Yes
Height adjustment	No
Cable lock slot type	Kensington
Panel mounting interface	100 x 100 mm
Display diagonal	22 \
Display resolution	1680 x 1050 pixels
Contrast ratio (dynamic)	-
Contrast ratio (typical)	1000:1
Viewing angle, horizontal	160 °
Digital vertical frequency	48 - 76 Hz
Digital horizontal frequency	24 - 82 kHz
Display brightness (typical)	300 cd/m²
Supported graphics resolutions	1680 x 1050 (WSXGA+)
Power consumption (standby)	2 W
Power consumption (typical)	65 W
Storage temperature (T-T)	20 - 60 °C
Operating temperature (T-T)	5 - 35 °C
DVI-I ports quantity	0
RMS rated power	4 W
Number of speakers	2
Product color	Black
Country of origin	China