HP z34c User Manual

Identifying rear and side components
Component Function
1 Menu button Press to open the OSD menu, select a menu item from the OSD, or close the
OSD menu.
2 Plus button If the OSD menu is on, press to navigate forward through the OSD menu and
increase adjustment levels.
If the OSD menu is inactive, press to open the audio menu.
3 Minus button If the OSD menu is on, press to navigate backward through the OSD menu
and decrease adjustment levels.
If the OSD menu is inactive, press to advance to the next active input port
(HDMI, MHL / HDMI, DisplayPort).
4 Master Power Switch Turns off all power to the monitor.
NOTE: Putting the switch in the Off position will yield the lowest power
state for the monitor when not in use.
5 DC Power connector Connects the DC power adapter to the monitor.
6 USB 3.0 Upstream Connects the USB hub cable from the source device to the monitor.
7USB 3.0 Downstream with
Charging
Connects optional USB devices to the monitor.
8 HDMI Connects the HDMI cable from the source device to the monitor.
9 HDMI MHL Connects the HDMI or MHL cable from the source device to the monitor.
10 DisplayPort Connects the DisplayPort cable from the source device to the monitor.
NOTE: The USB 3.0 Downstream with Charging ports also provide current to charge a device such as a smart
phone or tablet even when the monitor is in Sleep mode.
Identifying rear and side components 5

HP z34c Specifications

General

Brand	HP
Model	z34c
Category	Monitor
Language	English