Connecting the cables
NOTE: The monitor ships with select cables. Not all cables shown in this section are included with the
monitor.
1. Place the monitor in a convenient, well-ventilated location near the computer or source device.
2. Connect the video cable(s).
NOTE: The monitor will automatically determine which inputs have valid video signals. The inputs can
be selected by pressing the Minus button on the side panel or through the On-Screen Display (OSD) by
pressing the Menu button and selecting Input Control.
ā
Connect an HDMI cable to the HDMI port on the back of the monitor and the other end to the HDMI
port on the source device.
6 Chapter 3 Setting up the monitor
To Next Page
Loading...
Need help?
General
