Biometrics & Password
Fingerprint ID
You can enroll a
ngerprint and then use it to unlock the screen and access your Safe, App
Lock, and more.
Enroll a Fingerprint
For enhanced security, you can enroll a ngerprint only when Pattern, 4-digit PIN,
Custom PIN, or Password is being used as the unlock method. After a restart or if
ngerprint recognition fails, you will need to use your lock screen password to unlock
your tablet.
1 Go to Settings > Biometrics & password > Fingerprint ID and follow the instructions
to set or enter the lock screen password.
2 Touch New ngerprint to begin enrolling your ngerprint.
3 Place your ngertip on the ngerprint sensor. When you feel a vibration, lift your nger
then press again. Move your nger around to enroll dierent parts of it.
4 When the enrollment has been completed, touch OK.
You can now place your nger on the ngerprint sensor to unlock the screen.
Rename or Delete a Fingerprint
1 Go to Settings > Biometrics & password > Fingerprint ID and enter your lock screen
password.
2 In the Fingerprint list section, touch an enrolled ngerprint to rename or delete it.
Identify a Fingerprint
Fingerprint identication allows you to match your ngers with the enrolled ngerprints.
1 Go to Settings > Biometrics & password > Fingerprint ID and enter your lock screen
password.
2 In the Fingerprint list section, touch Identify ngerprint.
3 Touch the ngerprint sensor with your nger. The recognized ngerprint will be
highlighted.
Use Your Fingerprint to Access Your Safe
1 Go to Settings > Biometrics & password > Fingerprint ID and enter your lock screen
password.
2 Turn on the switch for Access Safe and follow the onscreen instructions to link your
ngerprint with the Safe.
Now you can go to Files > Categories, touch Safe, then use your ngerprint to access it.
Settings
79
To Next Page
Loading...
Need help?
General