This section describes how to handle the fault that no information is output from the CLI serial
port.
5.13 Failing to Log In to the ISM
This section describes how to handle the fault that users fail to log in to the ISM.
5.14 Failing to Dial by the Modem
This section describes how to handle the faulty that the modem fails to dial.
5.15 Invalid Extend LUNs
This section describes how to handle the fault that extend LUNs are invalid.
5.16 Resource LUN Fault
This section describes how to handle the resource LUN fault.
5.17 HyperImage Fault
This section describes how to handle the HyperImage fault.
5.18 Automatic Termination of HyperImages
This section describes how to handle the fault that HyperImages are automatically terminated.
5.19 HyperCopy Fault
This section describes how to handle the HyperCopy fault.
5.20 Failing to Discover the Connected Disk Enclosure
This section describes how to handle the fault that the connected disk enclosure fails to be
discovered.
5.21 No Available FC Link on the ISM
This section describes how to handle the fault that no available FC link is displayed on the ISM.
5.22 No Available iSCSI Link on the ISM
This section describes how to handle the fault that no available iSCSI link is displayed on the
ISM.
5 Troubleshooting of Common Faults
OceanStor S2600 Storage System
Troubleshooting
5-2 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 03 (2010-01-28)
To Next Page
Loading...
Need help?
General