l No: On the menu bar, choose Alarm > Alarm Management… to go to the Alarm
Management interface. According to Advice on the Current Alarm tab, remove the fault.
If the fault persists, contact technical support engineers. For how to obtain technical support,
see 3.4 Obtaining Technical Support.
----End
Postrequisite
After replacing the disk module, mark the removed disk module for later handling.
6.5 Replacing a Fan Module
This section describes how to replace a fan module.
Impact on the System
During the process of replacing a fan module, the performance and reliability of the system may
be degraded.
NOTE
During the process of replacing a fan module, the performance and reliability of the system may be
degraded; therefore, it is suggested to replace the controller during the time period that services are not
busy.
Prerequisite
Before you replace a fan module, the following conditions are required:
l The spare parts to be used are ready.
l The configuration data is backed up.
l To fan module to be replaced is located.
Tools and Materials
Before replacing a fan module, prepare the following tools:
l ESD-preventive gloves
l ESD-preventive wrist strap
l ESD-preventive clothes
l ESD-preventive bag
l Tag
Precaution
When replacing a fan module, pay attention to the following:
l Remove and insert a fan module with equal force; otherwise, too much force may cause
damage to the physical appearance or plug-ins.
l When replacing a fan module, you must remove the fan module and install a new fan module
within one and a half minutes.
l Do not remove the two fan modules at the same time.
6 Replacing Parts
OceanStor S2600 Storage System
Troubleshooting
6-8 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 03 (2010-01-28)
To Next Page
Loading...
Need help?
General