Parameter Description Setting
Continuous presence Specifies the maximum number
of site videos that can be viewed
simultaneously during the
conference. After continuous
presence is broadcast, the sites in
the conference can view the
videos of multiple sites
simultaneously.
If you select OFF for this
parameter, the conference does
not support continuous presence.
The default value is OFF.
Anonymous H.323
sites
Anonymous PSTN
sites
Anonymous SIP sites
Specify the number of H.323,
PSTN, and SIP anonymous sites
that are allowed to join the
conference. Anonymous sites are
sites without defined numbers.
For example, to allow five H.323
anonymous sites to join the
conference, set the Anonymous
H.323 sites parameter to 5. To
avoid H.323 anonymous sites
from joining the conference, set
the Anonymous H.323 sites
parameter to 0.
NOTE
If Conference line type is set to
SIP on the conference settings
screen, you only need to set
Anonymous SIP sites, Conference
control password, and SRTP
conference.
The default value is 0.
Conference control
password
Specifies the password to the
conference. This password is
required in the following
situations:
l A site wants to obtain the
chair control rights to chair
the conference.
l An anonymous site wants to
join an authentication
conference.
The value can contain a
maximum of 32 digits.
HUAWEI TE30 Videoconferencing Endpoint
User Guide 6 Conference
Issue 01 (2013-03-27) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
54
To Next Page
Loading...
Need help?
General
